Heating Oil Service Plan

Peace of mind in case we need to repair your heating system

service plan

Did you know that heating systems break down most often when the weather is the most severe? That's when your comfort systems are under the most stress. Plus, if your systems are older or you skip regular maintenance for them, your chances of having a breakdown increase dramatically. To prevent these problems, we developed two heating oil service plans: Elite Protection and Premier Protection

Our plans include the most extensive written guarantees ever offered by a home comfort provider in our area.

  1. You will not be charged overtime for emergency repairs.
  2. Annual tune-ups are included in the plans. Tune-ups prevent breakdowns, extend equipment life and cut energy costs by ensuring your system runs at peak efficiency. In fact, our expert tune-ups can save you as much as 10% on your annual fuel bills.

Visit our FAQ page for answers to frequently asked questions about our service plans.


Click each plan below to see full details.


 

ELITE

Protection Plan

Elite Protection Plan includes:

  • FREE overtime charges.
  • FREE annual boiler or furnace tune-up.
  • FREE parts and labor on some heating repairs (see complete list).
  • Priority service.

This plan covers many things that typically can go wrong with your system and includes an annual tune-up. Also, Wilson will repair or replace, during the life of this service plan, with no charge for parts and labor, any of the following items that may become defective due to normal use or wear and tear.



Controls Furnace Systems
  • aquastat
  • cad cell control
  • circulator control
  • combination control
  • draft regulator
  • emergency switch
  • fuses
  • high limit control
  • low limit control
  • primary control
  • reverse aquastat
  • stack control
  • temperature gauge
  • thermostat (manual or nonprogrammable digital)
  • triple aquastat
  • air cones
  • air diffuser
  • air filter, standard (one set)
  • air regulator
  • air stat
  • blower bearings
  • blower belt
  • blower complete
  • blower motor (non-ECM, up to 1/3 hp)
  • blower pulley
  • blower shaft
  • blower wheel
  • fan control
  • limit control

Burner Replacement Parts Boiler Systems Main Zone
  • burner blast tube
  • burner coupling
  • burner fan
  • burner flange gasket
  • burner motor
  • buss bar transformer leads
  • cad cell assembly
  • cad cell eye
  • delayed oil valve
  • delayed oil valve coil
  • electrode assembly
  • electrodes
  • end cone
  • ignition transformer
  • ignition wiring
  • low voltage transformer
  • low voltage wiring (exposed)
  • nozzle
  • nozzle adapter
  • nozzle line
  • bearing assembly
  • circulator complete
  • circulator coupling
  • circulator impeller
  • circulator motor
  • circulator motor mounts
  • circulator switch
  • circulator wicking
  • zone valve complete
  • zone valve motor
  • zone valve relay
  • zone valve stem

Services Fuel Supply Parts
  • adjusting boiler pressure
  • adjusting water level
  • venting baseboard radiators
  • Firomatic valve
  • flare fittings
  • fuel filter cartridge
  • fuel filter complete
  • fuel pump
  • fuel pump bleeder
  • fuel pump seal
  • fuel pump strainer
  • oil line (exposed)
  • oil line fittings

Loyalty Credits
(included with each plan)

See details.

It is our goal to reward our loyal customers. You earn $75 in Loyalty Credits each year you purchase a service plan, up to a lifetime maximum of $600 while you are a customer. You can use these credits toward the purchase of a variety of heating and cooling equipment. (The figures below show how much can be used for any one item.)

  • boiler
    $600
  • burner
    $100
  • gas or electric water heater
    $150
  • central a/c system
    $500
  • programmable digital thermostat
    $50
  • germicidal ultraviolet light
    $50
  • HEPA central air purifier
    $200
  • furnace
    $500
 

Tune-Up

Your boiler or furnace will be tuned up annually to ensure that your heating system operates at maximum efficiency. We will:

  • test and adjust oil burner for maximum efficiency, using combustion testing equipment.
  • inspect combustion chamber.
  • oil all motors on burner, fans and circulators.
  • clean and check electrodes and nozzle assembly.
  • install air filters, supplying oil filter cartridge and burner nozzle, if necessary.
  • check all safety and operating controls.
  • check oil tank and oil lines.
  • vacuum furnace and flue pipe, including chimney base (where accessible).
 

Loyalty Credits
(included with each plan)

Click here to read our terms.


Premier

Protection Plan

Premier Protection Plan includes:

  • FREE overtime charges.
  • FREE annual boiler or furnace tune-up.
  • FREE parts and labor on everything in our Elite Protection plan plus many other significant additions.
  • Priority service.

Our Premier Protection Plan includes everything in our Elite Protection Plan plus the significant addition of the following major parts and services to give you maximum protection and peace of mind.



Parts/Services  
  • air vents
  • automatic water feeder
  • baffle
  • blower motor (non-ECM, up to 3/4 hp)
  • boiler valves
  • circuit breaker
  • circulators and zone valves (unlimited)
  • thermostat (clock or programmable digital)
  • combustion chamber
  • ductwork (existing)
  • Ecomatic control
  • expansion tank
  • exposed heating pipes (copper only)
  • Extrol tank
  • feed valve
  • flow valve
  • gauge glass set
  • humidifier fan
  • humidifier motor
  • humidifier pad
  • low water cutoff
  • mixing valve element
  • PressureTrol
  • purge valve
  • purging of complete system (if necessary)
  • Pyrostat
  • radiator valves
  • relief valve
  • solenoid valve
  • Space-Gard air cleaner element

Loyalty Credits
(included with each plan)

See details.

It is our goal to reward our loyal customers. You earn $75 in Loyalty Credits each year you purchase a service plan, up to a lifetime maximum of $600 while you are a customer. You can use these credits toward the purchase of a variety of heating and cooling equipment. (The figures below show how much can be used for any one item.)

  • boiler
    $600
  • burner
    $100
  • gas or electric water heater
    $150
  • central a/c system
    $500
  • programmable digital thermostat
    $50
  • germicidal ultraviolet light
    $50
  • HEPA central air purifier
    $200
  • furnace
    $500
 

Tune-Up

Your boiler or furnace will be tuned up annually to ensure that your heating system operates at maximum efficiency. We will:

  • test and adjust oil burner for maximum efficiency, using combustion testing equipment.
  • inspect combustion chamber.
  • oil all motors on burner, fans and circulators.
  • clean and check electrodes and nozzle assembly.
  • install air filters, supplying oil filter cartridge and burner nozzle, if necessary.
  • check all safety and operating controls.
  • check oil tank and oil lines.
  • vacuum furnace and flue pipe, including chimney base (where accessible).
  • test and adjust oil burner for maximum efficiency, using combustion testing equipment.
  • inspect combustion chamber.
  • oil all motors on burner, fans and circulators.
  • clean and check electrodes and nozzle assembly.
  • install air filters, supplying oil filter cartridge and burner nozzle, if necessary.
  • check all safety and operating controls.
  • check oil tank and oil lines.
  • vacuum furnace and flue pipe, including chimney base (where accessible).
 

Loyalty Credits
(included with each plan)

Click here to read our terms.